Anyone looking for parts for a youngtimer or classic car comes across three terms: NOS, reproduction and used. All three have their place – but they mean very different things, including in price. In this guide we explain what we mean by these terms, how we check parts and which misconceptions we regularly clear up.
NOS – new parts from old stock
NOS stands for New Old Stock. These are new parts from old inventories: unused, some still in their original packaging – just as they once sat on the dealer's shelf.
Because many of these parts are 20 to 50 years old, they often show storage marks. That is normal:
- faded cardboard boxes
- tears or dents in the packaging
- faded part numbers on the labels
We clean all packages before listing them and photograph each part individually wherever possible, so you can see exactly what you're getting online. By prior arrangement you can also view the parts in our showroom in 49635 Badbergen, Germany.
How we verify authenticity: we check the embossed part number and compare it in the Mercedes-Benz parts catalogue. This way we make sure it is a genuine part and which vehicle it belongs to.
Current parts can be found under Genuine parts (NOS).
Reproduction – when the original is no longer available
Many parts have been unavailable for years or decades. Then only a reproduction will do. Examples from our range:
- Leather items: covers for centre armrests, for R129 seats, headrests and seat bolsters, or the B-pillar trim for the W124
- Gear lever gaiters in genuine leather, synthetic leather and rubber
- Antenna seals
- 3D-printed plastic parts – practically everything in the interior made of plastic
The fit is very good. Over many years we have had hardly any returns on reproduced parts – for us the best proof that the parts fit and our customers are satisfied.
Reproduced interior part from industrial SLS printing
Why 3D printing is not a hobby part
The most common misconception we come across: "3D printing is inferior." Many people think of a small printer for a few hundred euros like the one at home – and wonder why a part then costs €60, €70 or €80.
Our parts are not made on home printers but using the SLS powder printing process on industrial machines. Plastic powder is fused layer by layer. Such a machine costs between €500,000 and €700,000 – excluding material and running costs. It is not comparable to a home printer in quality, dimensional accuracy or durability.
We do have a small printer in our showroom – for development:
- We scan broken or missing parts, also directly on the customer's car.
- We design the part in-house.
- We print prototypes small first and check whether the dimensions are right.
- Only when everything fits does the final print file go into production on the industrial SLS printer.
The original parts were almost all injection-moulded back then. The tooling usually no longer exists – and for the small quantities in the classic car sector, a new tool would never pay off. 3D printing makes it possible to offer parts that have long been unavailable again, up to a certain size. All parts can be found under Reproductions, custom parts & 3D printing.
Used parts – rare, but in our range
A large part of our business is stock clearances: we buy old inventories from private or company liquidations or sell them on commission. Occasionally used parts come to us this way. That's why you'll also find a few used parts in our range – deliberately only a few.
Do you have an old stock of parts yourself? Feel free to get in touch.
What does what cost?
- Used is usually the cheapest option.
- Reproduction depends heavily on the part. Small parts like gear lever gaiters can be made inexpensively. A 3D-printed part costs more: before it can be sold it has to be scanned, measured, designed and tested. Because only a few units are needed in the classic car sector, this effort is spread over few parts. In return, the part is available at all again.
- NOS is often expensive too: the parts are in original packaging, have not been available from the manufacturer for years or decades and are traded accordingly.
Delivery time, warranty and returns
NOS parts are usually in stock. 3D-printed parts are made to order: after your order the print file goes into production; in total you should allow around 14 days. The exact information is on every product page.
There are no differences in warranty and returns: all parts come with a statutory warranty, and returns follow the statutory EU rules.
Part not in the shop?
Ask us. Send us the part number – ideally via WhatsApp to +49 162 9262645 or via our contact form. We'll check our stock or see whether the part can be reproduced. We show new parts and projects from the workshop on Instagram.
More guides: Restoring wood trim · Refurbish or replace your steering wheel